ArlingtonBoxes
Technical4 min read

How to Properly Store and Stack Corrugated Boxes

How you store and stack corrugated boxes has a direct effect on their strength and usability. Poor storage can reduce stacking strength, leading to crushed products and wasted money. Follow these practices to get the most from your packaging.

The Enemy: Moisture

Moisture is the single biggest threat to corrugated boxes. Damp or humid conditions weaken the fluting and the board, and even brief exposure can compromise a box's ability to protect its contents.

  • Store boxes indoors in a dry space whenever possible
  • Keep boxes off the ground on pallets or shelving
  • Avoid very humid areas
  • Keep boxes away from sprinkler heads, HVAC vents and open dock doors
  • If storing outdoors temporarily, wrap pallets in stretch film and cover them with tarps

Proper Stacking Technique

How you stack boxes on a pallet determines whether they arrive intact. Follow these principles:

Column Stacking vs. Interlocking

Column stacking (boxes directly above each other, corners aligned) gives the highest compression strength, because the corners of a box carry most of the stacking load. Interlocking (alternating box orientation) gives better lateral stability but reduces compression strength. Column stacking with stretch wrap is a common approach; interlocking is more common when boxes are not wrapped.

Tip: Align box corners vertically when column stacking. Even a small offset can reduce stacking strength.

Weight Distribution

Place heavier boxes on the bottom layer and lighter ones above. This prevents the bottom boxes from being crushed.

Overhang and Underhang

Boxes should sit flush within the pallet footprint. Overhang leaves boxes without support and makes them easy to damage during handling. Boxes set too far inside the edge waste space and can shift in transit.

Maximum Stack Height

Every box has a maximum stacking strength determined by its construction, dimensions and contents. Do not stack higher than the boxes are rated for, and check the Box Maker Certificate on the box when in doubt.

Storage Duration

Corrugated boxes under constant load lose strength over time, a phenomenon called creep. For long-term storage, reduce the number of layers or use heavier-duty boxes.

Note: Rule of thumb: if boxes will be stored under load for an extended time, choose boxes rated well above the actual load to leave a safety margin for creep and humidity.

Handling Best Practices

  • Use forklifts and pallet jacks carefully, since punctured boxes lose strength
  • Never drop or throw corrugated boxes, even empty ones
  • Store flat (unassembled) boxes upright on edge or fully supported to prevent warping
  • Keep storage areas clean and free of pests
  • Rotate stock (first in, first out) to prevent long storage under load

Need Packaging Help?

Tell us what you need and a partner supplier in our network follows up with options for Arlington and the DFW area.